制 程 能 力 | ||||
内容 | 常规 | 特殊 | ||
层数 | 单面板 软硬结合板 多层板 镂空板 双面板 | HDI | ||
完成板厚 | 0.07mm-2.00mm | 0.05mm-2.50mm | ||
最小孔径 | 0.2mm(CNC) | 0.15mm(CNC) | ||
PTH 孔的最小焊盘 | 0.4mm | 0.35mm | ||
最小线宽线距 | 1/3OZ 2mil/2mil | 1.5mil/1.5mil | ||
1/2OZ 3mil/3mil | 2.5mil/2.5mil | |||
1OZ 4mil/4mil | 3mil/3mil | |||
线到焊盘的最小距离 | 0.1mm | 0.08mm | ||
阻抗公差 | 50Ω+/-10% | |||
差分阻抗 | 100Ω+/-10% | 75Ω+/-10% | ||
表 面 处 理 厚 度 | ||||
镀锡 | Sn 3um-8um | |||
镀镍 | Ni 2um-8um | |||
沉金 | Au 0.05um-0.1um | |||
OSP | OSP 0.3um-0.7um | |||
沉锡 | Sn 0.5um-1.0um | |||
镀金 | Au 0.25um-1um | |||
外型公差 | +/-0.05mm | Precision Mode | ||
+/-0.1mm | Common Mode | |||
+/-0.2mm | Crude Mode | |||
+/-0.3mm | Blade Tooling | |||
功 能 测 试 | ||||
热冲击 | IPC-TM-650.2.6.7 | |||
侧蚀测试 | IPC-TM-650.2.6.3 | |||
绝缘测试 | IPC-TM-650.2.6.3 | |||
盐雾测试 | IEC-68-2-11 | |||
S M T | ||||
连接器 | Min Pitch 0.4mm | |||
元器件 | Min Component Size 0201 | |||
测 试 寿 命 | ||||
折弯测试 | 5-12万 50-120Thousands | 60Thousands if no special Requirement | ||
弯曲测试 | 5-12万 50-120Thousands | 60Thousands if no special Requirement | ||
疲劳测试 | 160-200g 0.12-0.16mm | Per Dom Requirent | ||
包 装 | ||||
包装规范 | 真空包装 | |||
吸塑盒 | 恒温恒湿 | |||
袋装 | ||||
普通包装 | ||||